Destroy toxic black mold roots (*Stachybotrys*) on walls, ceilings, and shower tile grout. Long-lasting residual barrier protection engineered for Kenyan climates.
Most homeowners in Kenya attempt to treat bathroom wall mold or dark ceiling patches using standard supermarket bleach. While bleach turns dark surface mold clear temporarily, it **does not kill the mold root system** beneath porous wall surfaces. Bleach consists of 90% water; when applied to porous plaster, drywall, or stone walls, the chlorine evaporates rapidly off the surface while the water sinks deep into the substrate — actually feeding the fungal root network (*mycelium*).
**MoldKill Max** was developed specifically for professional remediation in Kenya. Its specialized non-bleach fungicidal active ingredients penetrate deep into wall pores to kill microscopic hyphae and spores at the root, leaving a protective residual coat that prevents new spores from colonizing treated areas for months.
Ensure the area has good airflow. Wear gloves and a mask if dealing with heavy black mold.
Spray MoldKill Max generously over affected tiles, grout, ceilings, or painted plaster.
Do NOT wipe off immediately. Allow 24–48 hours for deep root penetration and active kill.
Run a dehumidifier to keep room humidity under 50% so mold never has water to return.
Household bleach is 90% water and lacks deep-penetrating surfactants. When applied to porous surfaces like painted plaster, drywall, or concrete blocks, the chlorine stays on the surface while water sinks deep into the material — effectively feeding the root system (mycelium) of toxic mold, causing it to return stronger within weeks.
MoldKill Max contains dual-action fungicidal agents combined with penetrating micro-surfactants that sink deep into porous wall plaster, drywall, tile grout, and wood. It destroys the fungal cell wall at the root and leaves behind an invisible protective barrier that prevents new spores from attaching for up to 6 months.
Yes. MoldKill Max is formulated for safe indoor application in homes, bedrooms, kitchens, and bathrooms. When sprayed according to instructions and allowed to air out, it is non-toxic to children and pets once dry.
Spray MoldKill Max generously onto affected areas (bathroom tiles, painted walls, or ceilings) until fully saturated. Do NOT wipe off immediately — allow the chemical to penetrate and dry naturally over 24 to 48 hours. Dead mold spores will discolor and fade away, leaving clean, protected surfaces.
If mold covers more than 3 square meters of wall or ceiling space, request a professional on-site inspection by our certified remediation team. Read about Mold Remediation Service Costs in Kenya.
